Formtek :: Appliance

HOME > COILED METAL PROCESSING > COIL PROCESSING SYSTEMS > APPLIANCE & METAL FURNITURE

Formtek Metal Forming offers a variety of Coil Processing Solutions to meet your specific processing challenge. We provide Cut-To-Length, Multi-Blanking, Coil Slitting & Precision Corrective Levelers.

Cut-to-Length Lines:

This system provides all the features of the Econo-CTL™ plus an expanded straightening section. Servo driven with speeds up to 200 FPM (60 m/min) Slitting option can be added

For more information please click on the brand logo.

Hydraulic bow tie shear and stacker, complete with part reject station, conveyor and lift table 50" WIDE .050" THICK 20,000 LBS

For more information please click on the brand logo.

A stacker with lift table, automatic pallet inserter and roller conveyor system 50" WIDE .050" THICK 20,000 LBS

For more information please click on the brand logo.

50" wide

0.45" thick

25,000 lbs.

Notching Press

Hydraulic Shear

For more information please click on the brand logo.

Multi-Blanking:

A fully automated heavy duty Cut-to-Length and Multi-Blanking line Closed loop servo motor drive ensures highly accurate blanks up to 10ga (3,4 mm) thick coil stock up to 72" (1830 mm) wide with blank length and width tolerances of ± 0.015" (0,4 mm) Variable speed drive features continuous output from 15 ft./min (4,6 m/min) to 150 ft./min (45,7 m/min) Adjustable slitter knives with operator access - easily and quickly positioned

For more information please click on the brand logo.

Lines of varying capacities for creating multiple blanks automatically 30 gauge to 10 gauge Length Tol. +/- .005" – +/- .060" Servo Driven Speeds of up to 200 FPM (60 m/min)

For more information please click on the brand logo.

Maximum capacity is 16ga (1.5 mm) 61" wide coil stock in mild steel Flying Shear up to 100 FPM. Mar resistant features available Dual pump 10 HP Hydraulic unit Three sets of slitting blades standard High carbon/high chrome shear blades

For more information please click on the brand logo.

Slitting:

Available for both .134" and .250" operation

Main base a rigid box beam construction to assure knife clearances are maintained at all times

Arbors are mounted in pre-loaded high precision anti-friction bearings to provide zero arbor endplay between the arbors and the journals

Journals are mounted in pre-loaded linear bearings to provide zero endplay between the journals and the housings

Outboard housing swings open for easy access to tooling

Slitter mounted on wheels that are powered from a self-contained drive system allowing maximum flexibility for tooling set-up, Slitter maintenance, and future expansion

For more information please click on the brand logo.

Levelers:

The perfect solution to problems posed by coil set, cross bow, wavy edge and center buckled material 72" Maximum Strip Width 0.500" Maximum Thickness Up to 300 FPM

For more information please click on the brand logo.