Formtek :: Duct - Rectangular - Seams / Joints / Notchings / Beaders

HOME > HVAC > HVAC CONTRACTORS & FABRICATORS > DUCT - RECTANGULAR

With Formtek’s established brands (Lockformer, Iowa Precision, Engel and Lion), you’ll find the industry’s widest range of high performance equipment for Heating, Ventilation and Air Conditioning (HVAC) products, built to a standard of quality that is second to none. Invest in Formtek solutions and you’ll see for yourself why we set the standard for product quality, performance customer service and integrity – the standard against which every equipment manufacture in the HVAC industry is judged.

Duct Rectangular:

It can be used as a stand-alone machine to produce duct blanks for Residential S & D or Commercial TDC Duct or it can be expanded into a complete full Fabriduct Line.

The machine has the capacity to remove coil set, bead, notch for two-piece or wrap duct, cut off, and bend L-section or wrap duct. It has options for adding Tie Rod Holes, Cleat Roller, Male Button Lock and Slitting.

For more information please click on the brand logo.

60" Coil Stock Max

Cleat Former (optional)

"L", "U", or full wrapper duct

For more information please click on the brand logo.

Uncoilers

Bending

Notching

Tie Rod hole punch

Shearing

Cleat Forming

TDF

Pittsburgh and snaplock seams

Insulation applied "L", "U" of full wrapper duct.

For more information please click on the brand logo.

Bends true 90º (1º - 45º - 90º) Mild stud capacity 20 gauge and lighten Air consumption .5 cu ft/cycle at 90 psi Bends upwards and automatically releases Other styles available

For more information please click on the brand logo.

Turns on "L" shapes, pre-formed ducts and flats 20 gauge Bend length 3"-29" Bend width ½" or 7/8" 110V or optional Transformer for 220V

For more information please click on the brand logo.

Mild steel 18 gauge and lighten Bend length 3"-35" Bend width 7/16"-1" Air consumption .9 cu ft/cycle at 100psi

For more information please click on the brand logo.

Joints:

Compact and light enough to be taken right to the job.

20-28 gauge capacity

Uses approximately 1" of material

5/16" Depth of pocket/size

30-75 fpm speed

For more information please click on the brand logo.

These powerful performers offer the HVAC industry day-in/day-out service

7 forming stations with 2 forming positions

14-22 gauge capacity

Uses approximately 1-3/8" to 1-1/8" of material

1/2" to 3/8" Depth of pocket/size

35 to 45 fpm speed

For more information please click on the brand logo.

Especially designed for commercial and industrial ductwork.

7 forming stations with 2 forming positions

14-22 gauge capacity

Uses approximately 1-3/8" to 1-1/8" of material

1/2" to 3/8" Depth of pocket/size

35 to 45 fpm speed

For more information please click on the brand logo.

For reinforce "S" and drive cleats plus two optional auxiliary sheet-edge operations. Combination "S" and drive cleat scrap cutter attachment available.

22-28 gauge for "S" cleat operation

20-26 gauge for drive cleat operation

"S" cleat width 1-1/16"

Drive cleat width 1-1/8"

100 fpm speed

For more information please click on the brand logo.

In just one pass, form a shape that combines a conventional "S" cleat with standing seam for greater strength and rigidity.

20-26 gauge

1-1/8" pocket

Uses 6-1/4" material stretch out inboard

60-70 fpm speed

For more information please click on the brand logo.

This Roll former has 12 forming stations and produces TDC© flanges at speeds of up to 50 fpm 18-24 gauge for TDC© 22 gauge for Clip 1-7/8" TDC 2-1/8" Clip

For more information please click on the brand logo.

Rapidly and automatically inserts and crimps corners into ductwork or fittings that use the TDC® method of joining. The machine requires only compressed air and 110-volt single phase current to operate. It may be used on the shop floor or the job site. Flange Type: TDC/F Gauge Range: 18 [.050"] to 26 [.022"] (1,27 mm to 0,56 mm) Cycle Time: Approx.:2 1/2 seconds per corner

For more information please click on the brand logo.

Attaches corners made from coil to duct TDF/TDC® flanges, raises up to work bench height for fittings. A dual head is also available.

For more information please click on the brand logo.

For closing longitudinal seams on rectangular duct. This machine is adjustable for duct made from 18" to 72" (457 to 1829 mm) coil width, and in gauges 26 to 18 (0.46 to 1.5 mm) It will accommodate duct with various end-joining methods such as raw, slip and drive, and most transverse flange systems This unit will also allow you to close Pittsburgh seams on straight edge fittings with a minimum length of 18 inches (457 mm)

For more information please click on the brand logo.

Notchings:

It allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand.

16-28 gauge

1 ½" for "V" notch (TDC Notcher only)

2 7/16" for TDC notch (TDC Notcher only)

Up to 5 notches on materials up to 16 gauge with 3-1/4" to 10" stretch out. (Speednotch model only)

For more information please click on the brand logo.

Beaders:

With this machine, only one operator is needed to produce SMACNA-approve beads 4 to 5 times faster than cross braking.

Up to 5 foot-wide material, 16 gauge maximum

1/8" pocket size

55 fpm

For more information please click on the brand logo.

Forms 5 beads or 12 centers Beads adjust to 3/16" depth Max. capacity 16 gauge x 60" wide

For more information please click on the brand logo.